MARTIN ELP WW
SPECIFICATIONS
PHYSICAL
Length: 644 mm (25.4 in.)Width: 255 mm (10.1 in.)Height: 255 mm (10.1 in.), 527 mm (20.1 in.) with bracketWeight: 11 kg (24.3 lb.) body only
DYNAMIC EFFECTS
Electronic dimming: 0–100%, Four dimming curve optionsStrobe and pulse effects: Variable speed and action, random strobeElectronic shutter effect: Instant open and blackout
CONTROL AND PROGRAMMING
Control options: DMX, stand-alone16-bit control: IntensityDMX address setting: Control panel with OLED display or via RDMDMX channels: 1/2/4PWM: 600–2400 HzDMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20Transceiver: Opto-isolated RS-485Stand-alone programming: Control panel with OLED display
OPTICS
Light source: 91 x 3 W warm white LEDsMinimum LED lifetime: 30 000 hours (to >70% luminous output)*Color temperature: 3000KFixed Lens Tube Options: 19°, 26°, 36° and 50°Zoom Lens Tube Options: 15–30° and 25–50°Binning: Tight color and flux binning*Figure obtained under manufacturer's test conditions
PHOTOMETRIC DATA
Light engine luminous output: 16000 lumensFixture luminous output: 7000 lumensCRI (Color Rendering Index) : >97CQS (Color Quality Scale): >93TM-30 Rf (IES TM-30-15 Fidelity Index): >93TM-30 Rg (IES TM-30-15 Gamut Index): >101TLCI (Television Lighting Consistency Index): >96
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
CONSTRUCTION
Housing: Die-cast aluminumColor: Black or white variantProtection rating: IP65
GOBOS AND COLOR FRAME
Gobo size : A size, 100 mm OD, 75 mm image*
Gobo size: B size, 86 mm OD, 64.5 mm image*Color frame size: 159 x 159 mm (6.25 in. x 6.25 in.)
*Gobo holder not includedINSTALLATION
Mounting: Adjustable bracketLocation: Indoor, outdoor use, suitable for wet locationsOrientation: AnyMinimum distance to combustible materials: 0.2 m (0.7 ft.)Minimum distance to illuminated surfaces: 0.5 m (1.6 ft.)
CONNECTIONS
AC power in, thru: P65-rated Neutrik PowerCON TRUE1 TOPDMX & RDM data in/thru: IP65-rated 5-pin XLR
ELECTRICAL
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 18.0 A
Power Factor: 0.99 @ 110 V , 0.97 @ 208 V , 0.96 @ 230 V / 240 V
Typical current draw: 2.6 A @ 110 V , 1.4 A @ 208 V , 1.2 A @ 230 V / 240 V / *
Power Consumption
Typical: 280 W *
Idle: 5 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.THERMAL
Cooling: Forced air (temperature-regulated, low noise)Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1000 BTU/hr.Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)